Bicycle paint for spraygun

With an HVLP spraygun or other, you can paint better and more economically !

Here are the offers of Stardust Bike paint professional polyester version, packaged in a can for spraygun application, intended for use with a spraygun, and selected especially for bike customization. These are therefore the same products used by the body painter, which can be applied to the frame and fork of a bike if you have a spraygun and an air compressor.

Like fairing or bodywork paints, « cycling » paint must be fine, flexible and resistant. These are multi-layer systems.

Identical to that of the bodywork, a precise system of multiple thin coats is used, from the base to the varnish, which will create depth, adhesion and resistance: Primer - 1K basecoat - varnish.

Yes, there are finishes that are applied in a single step (1K paint or matt lacquer), but we are interested here in effect paints exclusively.

Bike paint for spraygun

Fans of custom paints and other applied effect paints have found a fantastic playground with the world of cycling.

Custom is the art of personalization that combines technical and artistic specialties. Our colors offer the greatest possibilities for customisation, with the largest family of special paints in the world, available directly from the manufacturer. The combinations are infinite with certain paint effects, such as Candy or Chameleon, which can be applied and combined.

For those who are thinking about customising their bike paint and taking their old paint gun out of the garage, there are more discreet and classic finishes, such as metallic or chrome colors, or more exotic coatings, such as phosphorescent paint.

The tubular surfaces of a bicycle frame are limited but have the advantage of being able to show different angles and curves, revealing the pearlescent and color-changing effects of chameleon, candy or holographic effect colors.

Consumption of paints packaged in cans

We can see below that using a spray gun is much more cost-effectivel than using a spray paint can.

Average quantities* required for frame and fork :

Base color : 250ml

Fluorescent : 375ml

Chameleon : 300ml

Diamond : 250-500ml

Chrome : 250ml

Holographic : 250ml

Phosphorescent : 250-500ml

*Performance may vary according to the coverage desired, and especially according to the coverage capacity of a family of effects: some colors cover more than others.

How to use bicycle paint spraygun in the right way ?

Study and understand the instructions for each paint.

Use a small or large spray gun, and adjust the spray size to the minimum.

Keep a distance of 25cm from the support and always keep moving.

Keep your wrist flexible and mobile to follow the contours of the tubes, so as to spray at a 90° angle, and never with a grazing paint.

Carry out all the painting steps in sequence (<30min between each product) to promote cohesion between coats.

Stardust Spray bike paint

Primer and putty for bike paint

Special varnish for bike paint

Tools and accessories for bike paint

Special effects for bike paint

How to paint your bike ?
What paint to paint your bike ?
How to repaint your bike without dismantling it ?
How to repaint your racing bike ?