Fluorescent paint 125ml

Fluorescent

Fluorescent paints have the extraordinary ability to reflect more light than they receive.

Thanks to their highly saturated colour, an object painted with fluorescent paint will instantly stand out among others and capture people’s attention.

The automotive 1K paints from the manufacturer DeepField are single-component, solvent-based paints ready to use. They are easily applied in a few passes with a spray gun and can be thinned with any type of thinner.

Because fluorescent colours are transparent, they must always be applied over a perfectly white background.

Colour lifetime: To extend their lifespan, we strongly recommend applying our anti-UV Topcoat (see Clearcoats section), which helps protect and preserve colours. Without this UV protection, fluorescent paint can last up to three years before beginning to fade.

There is also a nano-ceramic protective coating, which is highly effective against UV rays. This product forms a glass-like layer when it dries—the more layers applied, the stronger the protection.

To maintain fluorescence intensity for as long as possible, apply multiple fluorescent coats to build sufficient film thickness.

Interesting information: According to studies, the most visible colours to the human eye during the day are yellow and orange, and before nightfall, it is green.

RAL correspondence:

Green: RAL6038
Yellow: RAL1026
Orange RAL2005
Red: RAL3026
Red: RAL3024
Yellow-Orange: RAL2007

Automotive Fluorescent Technical Data Sheet

Type of product: Solvent-based single-component acrylic 1K paint (to be Topcoated)

Destination: Cars, bikes, decoration, and other uses

Shades: Purple, Fuchsia, Pink, Red, Orange, Yellow-Orange, Gold Yellow, Yellow, Lime Green, Green, Blue

Aspect: Semi-transparent intense colours with a matt finish

Theoretical coverage: 3 m²/L

VOC: > 420 g/L

Mix: Paint 100 parts. Ready-to-use product. Stir well before use.

Application: Must be applied over a white background in 3 to 4 passes until coverage is achieved.

► Strengthen the protection of your paint by adding an anti-UV additive to the Topcoat.
Discover the concentrated anti-UV additive (dosage: max 1.5% in the Topcoat and 3% in the paint)

Warning: It is essential to apply the transparent Topcoat within 10 to 20 minutes after applying the fluorescent paint.

Resistance: Sensitive to UV and to heat above 150°C.

Tool setting: Spray gun – Nozzle 1.0 to 1.2 mm / Air pressure: 2.5 to 3.5 bar.

Drying at 20°C: Dust-free in 5–20 min / Touch dry in 15–30 min.

Advice:

A thicker fluorescent layer will extend the paint’s lifespan.

Adding 5% of any hardener to the fluorescent bodywork paint will result in slower drying and better curing.

Find here our complete FLUORESCENT paint kits:
► Bike Kit