Marble effect Automotive painting

MARBLELIZER allows to easilypaint a pearlmarble effect with spraygun and roll.Each pattern is truly unique and mysterious as it appears during the application.

Composition : Solvent based product, 1 component: VOC >420g/L

Aspect : Silver pearl

Mélange : Shake well before application

Covergae: 4 sqm/L

Application : Over a black and sanded background, apply in one time a thick coat, then place immediately a plastic wrap over the top of the painted surface. Wait a few seconds before you remove the plastic wrap. You can replace again the plastic film to achieve a pattern overlap.

Marblizer can also be applied by "dabbing" the paint. 

It’s important to clear coat right after, with a candy topcoat, to obtain a depth effect and coloured.

How to color the Marblizer?

the color of the "Marblizer" is unique: it is a silver gray product (which corresponds to BC1 on the color chart)
to color the "Marblizer", it is necessary to apply a "Candy" topcoat.
this colored clear topcoatis available
in the "Candy" topcoat can version
or in "Candy" topcoat spraycan version

Watch the video

COMPLETE KIT
(including Basecoat, Marblizer, Black, Clearcoat Candy):
>> The color is a choice and must be indicated in the comments box during the order

Complete Kit 3.5L: Include 1L black basecoat, 1L Marblizer, 1.5L Candy Clearcoat (Color to choose) and 50ml of hardener H420 - 3.5m² min.

Complete Kit aérosol: ((For those not possessing a gun or compressor) Include: Aérosol 400ml basecoat black, 400ml Marblizer, Aérosol Candy Clearcoat 290ml - 0.8m²

The application to the aerosol is much less easy than gun, we strongly recommend using our 'SPRAY CAN GRIP HANDLE'

For the complete kit, the choice of color is free. Communicate the chosen color by email to info@stardustcolors.com after the order simply.
To know the choice of available colors, download the color chart "Candy" pdf at the bottom of the page

Version W - waterborne formula without solvents
Application specifics

ready to use product
Dilutable with water: 10% for airbrush 0.5mm
Spraying with 1.4 mm nozzle - 3 bars
It is essential to let to heart dry well before varnishing.

The color chart PDF below can be found for high definition download at the bottom of the page: