SOLVENT-BASED 1K BASECOAT in Pot - MOTORCYCLE PAINT, ALL BMW COLOUR CODES
To order a shade of BMW: 1 - Choose the packaging and place the order. 2 - After you have submitted the order, specify the bike colour code and make by email in response to the email validating the order
For any questions about a BMW colour code, write to firstname.lastname@example.org. Preparation of the BMW paint and delivery within 48h*
BMW motorcycle Paint Composition: 1K Basecoat (solvent-based) In two steps: first the paint, then the clear coat.
Some BMW paints are three-layer paints: if your colour code requires this additional undercoat, our technician will contact you to propose you the first layer shade.
MIXING for the Motorcycle 1K Basecoat: - Pure version: Add 70% of the provided thinner - pre-thinned version: ready to use
- It is best to apply a primer*: - Over a clean background, sanded at 800 - Apply using sa pray gun (1 to 1.4mm nozzle, with a pressure of around 2.5-3 bar, at a temperature of 20°C) A very fine pass to create a good adhesion then 2 coats with a 5 minutes interval between each - Topcoat within 30 minutes maximum! Our range of topcoats here:
Covering power: - 1L of pure product/5-6m², thinned: 1L/3-4m² (for 2 coats) Count 1m² to 2.5m² depending on the size of the bike
This product is sold under the 2004/42/EC Guideline and the Reduced Solvent Consumption policy. Refer to the PDF at the top of this page.