£8.91
(VAT incl.)
Bags of 100 rubber finger gloves.In stock Three delivery options to choose from LaPoste, TNT or Chronopost
|
|
|
|
 0
£0.00
|
|
Artistic Pro Series 250ml or 1L – 47 WPU Acrylic Polyurethane Paints
WPU011-250
Opaque Series - STARDUSTCOLORS Artistic Range
Available in: 250ml or 1L
Water-based acrylic polyurethane base
Compatible for covering with/over solvent-based paints
VOC <3%
£16.20
(VAT incl.)
Reference:
WPU011-250
The paints in the WPU range are new-generation, professional-quality acrylic polyurethane formulas with excellent fluidity, allowing them to be sprayed with an airbrush or pneumatic spray gun.
WPU paints are composed of pigments that are highly resistant to light, giving them excellent levels of resistance.
The WPU (Water-based Polyurethane) range, based on acrylic resin, is the polymerisable* and solvent-free colour system from Stardust®, with a VOC (volatile organic compound) level of less than 3% (30 g per litre).
PU*: Optionally, between 1% and 3% of H6 hardener can be added to our water-based paint system to achieve an additional level of resistance.
WPU Stardust Pro paints can be used in many areas of activity (decoration, furniture, architecture, wood, bodywork), and in particular as single-coat finishes suitable for outdoor use.
Stardust Pro WPU for custom painting and bodywork painting
When used in a bodywork/helmet/motorcycle painting system, they must be applied to a primed/prepared surface, then covered and protected with a traditional bodywork varnish.
WPU Stardust Pro paints are the base paints (white base/black base) for the effect paints in the Stardust Hydro range:
(hydro chameleon paint/hydro opal paint/hydro fluorescent paint/...)
Mixing and use
Single-component, ready-to-use product. Shake/stir well before use.
If necessary, dilute by 5 to 10%* with distilled water, or our S6 thinners.
Potentially polymerisable: H6 hardener at 1–3%
*Please note that viscosity decreases rapidly at high temperatures, and excessive dilution may result in reduced adhesive strength.
Preparation:
On old, sound paintwork* sanded with P400 sandpaper.
On certain plastics (PVC, PC, ABS, PS **) after sanding, but also on certain metals (aluminium, steel) ** and wood.
Wet on wet, on all freshly painted water-based paints, without sanding during the first 24-48 hours.
* dust-free, grease-free, dry, clean
Depending on the nature of the metals and plastics, carry out preliminary tests before any production.
Application
Air gun with 1.0 to 1.4 mm nozzle
Air pressure: 3 bar
Airbrush: 0.2–0.5 mm nozzle
±100 g/m².
Recommended thickness: 25–50 µm dry (i.e. 1 to 2 coats)
Spray 1 to 2 coats with an interval of 10-15 minutes/20°C
Drying:
2 coats at 20°C:
- Dust dry: 15 mins
- Touch dry: 25 mins
- Ready for varnishing: 40 mins
- Ready for recoating without sanding: 48 hours
6 other products in the same category:
£17.00
(VAT incl.)
Acrylic thinner for airbrush
Our offer: 1L
£3.78
(VAT incl.)
Liquid gum for plastic arts and bodyworkAllow to hide and hide
Proposed in packaging :
30ml Liner, 60ml, 500ml, 1L, 5LIn stock and delivered in 48h
£24.00
(VAT incl.)
Nitro Block hydro coating for RC models
Water based product, without solvents
500 ml, 1 L, 5 L size
Available in White or Transparent
In stock : delivery within 48 hours
£7.64
(VAT incl.)
Liquid Mask HIKARI for lexanFor radio-controlled modelssizes : 60ml / 250ml / 500 ml / 1 L / 5 LSuitable for airbrush or brush
£8.50
(VAT incl.)
Delivery by Post (24-48h) or by Express mail (24h)
