Our Acrylic-PU Topcoats are suitable for all types of works, for model making, bodywork, as for jewels and small objects.
They are highly compatible with all other acrylic or solvent-based paints,
and provide a good adhesion to many bare substrates such as metal, plastic and glass.
Resistance to all chemicals, solvents, detergents, fuels
Ready for use super-fine textures, for 0.2mm nozzles
Easy to apply
Very good flexibility
Resistance to shocks and abrasion
Can be used with 0.2mm airbrush nozzles without any thinning!
Stardust® Airbrush Topcoats - Hybrid Acrylic-PU
Single component* Clear coat (but polymerisable if needed with our H6 Hardener), harmless, non-toxic water-based formula with less than 0.6% VOC.
|TOPCOAT & AUXILIARIES|
Airbrush, 3-4 bars (45-60PSI)
Shake the paint well before use
The thinning, if necessary, is at 20% max. with our thinners
Our H6 Hardener allows topcoat hardening like a bodywork clear coat (addition of 1 to 4%)
How to obtain a beautiful gloss clearcoat without “orange peel” effect?
1 - Provide sufficient air pressure, adapted to the amount of surface to be topcoated
2 - Apply 2-3 passes, wet and thick but not too much, otherwise it could result in sagging.
> Discover our 24L Compressor
Dry to the touch: 30-45 min at 20°C
Cleaning: with our cleaner thinner
> Discover our new ultrasonic cleaners
Stardust® is a European protected trademark