£45.00
(VAT incl.)
Glossy and transparent topcoat
2 component polyurethane
Specific adhesion on PC plastic
Delivered in a complete kit of 1,4L
|
|
|
|
 0
£0.00
|
|
Mini gloss or mat bodywork varnish kit with hardener and thinner
ST830-K0N
Mini complete varnish kit
Available in 3 Versions:
- Gloss UHS830
- Mat 4 ° ST822
- Ceramic ST8900X
All of our deliveries are made within 48hrs*
£27.00
(VAT incl.)
Reference:
ST830-K0N
Glossy UHS830:
Here is a real professional varnish to protect bodywork paints and give a high gloss, hard, resistant and durable finish.
UHS830 varnish allows maximum thickness after drying.
The kit includes:
500ml UHS-830 varnish + 175ml hardener 432 + 150ml thinner V1
Fast (5-15°C)
Normal (15-25°C)
Slow (25-35°C)
Mat 4 ° ST822:
The 4 ° matt effect remains equal and constant regardless of the thickness of the coats.
ST822 varnish has a much higher resistance than "standard" matt varnishes which are usually very sensitive.
The kit includes:
500ml varnish ST822 + 100ml hardener H423 + 150ml thinner V1
After drying, the varnishes are highly resistant (bad weather, UV, heat, Hydrocarbons)
Kit yield: approximately 4m² in 2 coats
ST8900X Ceramic Clearcoat Mini Kit
This undiluted, two-component liquid clearcoat features an innovative, custom-designed formula that produces a very thin, high-gloss coat, with accelerated drying (45 minutes to full cure) and very rapid hardening (hardness 400 in 24 hours / 440 in 48 hours), representing hardness levels 70% higher than the best automotive clearcoats.
The kit includes:
500ml ST8900X clearcoat + 500ml H440 hardener
Mixing instructions: 100 parts ST8900X clearcoat + 100 parts H440 hardener (zero dilution)
Mixed pot life: 20 minutes. Can be applied in two coats with any spray gun or airbrush.
How to mix UHS 830 varnish:
Mix by weight 3 parts of varnish + 1 part of hardener.
Dilute the whole between 5 and 15% with the thinner.
Stir and let stand for 5min. use within 30 minutes max.
Close the jars well after use.
How to mix ST822 polish:
Mix by weight 5 parts of varnish + 1 part of hardener.
Dilute the whole between 5 and 15% with the thinner.
Stir and let stand for 5min. use within 30 minutes max.
Close the jars well after use.
How to paint varnishes 830 and ST822:
Application in 2 coats, with an interval of 5-10min
Spray the varnish at a pressure of 3 bar, 20cm from the support
Drying of the topcoat:
Dry to the touch: 30-60min
Through-dry: 16hrs
Cooking with infrared: 10 (short waves) to 15 minutes (medium waves)
Drying at 20° 16h
Baking in the paint booth at 60°: 30 minutes
► find the product technical sheet for download at the bottom of the page (PDF)
6 other products in the same category:
£11.50
(VAT incl.)
Graphic range for airbrush professionalsSolvent-based topcoat for bodywork decorationformat 125 mlpure product to be diluted
£27.00
(VAT incl.)
BESA Ultra HS Topcoat available in complete kits*
Next day Delivery
*The complete kit includes the topcoat, hardener and thinner.Available in 290ml Aerosol spray can.
£63.00
(VAT incl.)
The ST-821 20° Matte Topcoat is part of Stardust® Variance Range, and is the second most Matt Clear Coat, just before the ST820 40° Semi-Matt Clear Coat and after the ST-822 4° Extreme Matte Clear Coat.Sold as a 1.35L...
£55.00
(VAT incl.)
Premium bodywork clearcoat for complete, very high thickness
Overloaded Extra high Solid, Ultra Leveling,High Glossy
delivered in 2L Kit
£15.45
(VAT incl.)
Available in
1L 5L
4 speeds:
Extra Slow (Retarder)
Slow (25-35°C)
Normal (15-25°C)
Fast (5-15°C)
