Delivery within 48-72 hours
Pay in 4x with no fees on purchases over £30
Get your online quote in less than 1 minute
Share your creations and receive vouchers
Earn loyalty points with every order
Return products within 14 days
5€ discount on your first order
€10 voucher for each referral
Subscribe to the newsletter: £5 discount
Click for more products.
No products were found.
PRIMERS, PAINTS & SPECIAL VARNISHES FOR
BODYWORK, DECORATION AND INDUSTRY

0

£0.00
Click for more products.
No products were found.

ESSENTIALS

Buying this product you will collect 2400 Star-Points with our loyalty program. Your cart will total 2400 Star-Points.
Thanks to your order,
Stardust is planting a tree.
treenation (Order from £50)

REPAINT adhesion promoter without sanding on paints

SPR-P540

REPAINT is a colorless product allowing to recreate an adhesion without sanding on automotive or industrial paints and varnishes before varnishing or applying another product.

Available packaging :
250 ml / 500 ml / 1 L
400 ml aerosol spray

Read more Show less
£17.28 (VAT incl.)
Packaging
Reference:
SPR-P540
Description

REPAINT is a clear primer specially designed to create a bond between a paint, a plate, a clearcoat and a new covering layer, without any sanding. REPAINT is exclusive to StardustColors


REPAINT is especially useful and practical when the covering time* is too long between the application of the paint underneath and the new coat of paint or clearcoat.


Sometimes, it can also be difficult or impossible to sand. This is the case with delicate pearl paints and airbrush decorations : sanding with an abrasive sponge can damage them.


The covering time is an essential notion in the field of body painting. It refers to the rules of the art of painting. Once the paint is dry, a new paint cannot adhere to its surface without sanding. Here are the maximum covering times for different types of paint (20°C):

Solvent-based 1K basecoat : 30 min

Hydro 1K basecoat : 24-72h

2K paints and clearcoat : 1h

Field of use  :

Apply REPAINT before applying topcoats to ensure proper adhesion of automotive or industrial paint.
Repaint is intended primarily for paint adhesion.

Other substrates :

On raw materials, we offer a variety of specific or general adhesion primers here : plastics, brass, aluminum, metal or chrome.

If in doubt, do not hesitate to ask for advice : info@stardustcolors.com

Preparation of the background

Preferably, clean the substrate of any visible or invisible impurities, such as dirt, oil, grease and demolding agents, with isopropyl alcohol or degreaser. Dry well after cleaning.


REPAINT allows to adhere without sanding

Mixing and applying

Ready to use, one-component product

Apply REPAINT in half a coat (thin adhesion coat), followed after 5 minutes by a thin coat
As with all adhesion promoters, it is recommended to apply a thin coat. Thicker coats tend to increase the risk of delamination.

It is very important to cover REPAINT quickly with the next coat of paint. Apply as soon as the thin coat of REPAINT is sticky (2-3 min). If you wait until it is completely dry, you will have to apply a new coat of REPAINT

Tool cleaning :

with car body thinner

Adjusting the gun :

3 bar / nozzle 0,5 - 1,4 mm

Yield : 10m² / Liter / 1 coat

Question : I paint a lot with airbrush over periods that can exceed 2 hours and my work is very often not sandable or even passable with a green or gray sponge because my layers of paint are very thin for some.

Can REPAINT be applied as the last pass just before the UHS clearcoat ?

Answer : yes perfectly, REPAINT is specially made for that

Read moreShow less
Product Details
SPR-P540
Reviews
No comments
Questions(FAQs)
Customers who bought this product also bought:
6 other products in the same category:

Menu

Settings