polyester body mini putty 500 g with hardener

The mini putty pot is our new special offer in small format, for filling irregularities on small surfaces

The putty is a polyester-based paste that hardens with a hardener.

This high quality professional product provides excellent adhesion on metal directly, but also on some plastics and wood.

The mini pot of putty allows the filling of imperfections ranging from 0.2 mm to 5 mm.

It dries quickly and without shrinkage* and allows to recreate an almost perfect surface, with a sanding at 220-320

Use

Bikes, cars, motorcycles, plastic fairings, furniture

The product can be applied on soft surfaces provided that it is used in thin thickness

Application

Mix with the hardener included in the offer
>> add about 2% hardener to the total weight of the putty
mix the paste perfectly with spatulas

use the product quickly, before 4 to 5 minutes, because it hardens very quickly and becomes unusable after 5 minutes.

Apply on a sanded surface (220) necessarily

Thoroughly dry and can be sanded : 20 minutes

Sand with 220 grit then 320 grit

A putty cannot be covered directly with paint, because it does not create a perfect surface, and defects will be visible.

It is imperative to apply a primer in spray or pot