Fast Filler Primer /Surfacer
Aerosol range for automotive and motorbike
The filler primer surfacer is remarkably efficient and very easy to apply. It fills the minor imperfections before the painting.
The spray is composed of two separate compartments (clearcoat and hardener) that will open, allowing the two ingredients to mix during the application. Once used, the length of life of the product will be of 1 hour.
Composition : Solvent based product.
Capacity : 290ml
Colour: White or Black
Mix / Application : Press the red button under the spray can to trigger the hardener. Shake thoroughly. Apply 2/4 thick coats. Wait 1 minute between each pass. Dry to the touch in 1 hour.
Two-component aerosol !
Simply press the button under the spray can to activate the hardener !
Precautions for use : the use of solvent-based products is for professionals only. In all cases work in a well ventilated room or outdoors, and it is imperative to wear a mask to protect against VOC and protective gloves. Do not spray near a flame or sources of ignition (R12 Extremely flammable product). Do not store the aerosols near heat (+50°C).
Our StardustColors team stays at the entire disposal (from monday to friday from 10am to 1pm and from 2pm to 6pm, by phone or mail) of StardustColors customers to provide application advices and technical and safety data sheets.
Harmful. Contains : Xylenes. For professionnal use only. R38 Irritating to skin. R20/21 Harmful by inhalation and in contact with skin. R12 Extremely flammable. S 36/37 Wear suitable protective clothing and gloves. S16 Keep away from sources of ignition - No smoking. S23 Do not breathe vapour. S24/S25 Avoid contact with skin and eyes. S33 Take precautionary measures against static discharges S60 This material and its container must be disposed of as hazardous waste. S62 If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label where possible. S9 Keep container in a well-ventilated place.
For use by professionals. Contains isocyanates.
The application to the aerosol is much less easy than gun, we strongly recommend using our 'SPRAY CAN GRIP HANDLE'