PRIMER FOR ALUMINIUM ZINC CHROME P714

Adhesion Primer for Aluminium
Suitable for non-ferrous metals such as stainless steel, galvanised materials and chrome.

This primer is specifically formulated for bare or raw aluminium surfaces and other non-ferrous metals.

Since these metals are difficult substrates for adhesion, it is strongly recommended to first prepare them with our DERINOXALU product.

The surface must be degreased and sanded to ensure optimal adhesion.

Derinoxalu is applied prior to painting. It provides perfect paint adhesion and guarantees long-term durability.

The Wash Primer is also highly effective on a wide variety of materials (PVC, glass, plastic, steel, etc.).

It acts as a professional-quality universal primer suitable for both bodywork and industrial applications.

Ready-to-use primer

No thinner required. Apply preferably with a spray gun.

Colour: white / grey / black

Application:

Apply two to three thin coats, allowing a 5-minute interval between each.

Always spray a very thin initial coat to ensure adhesion.

Recoating:

Can be overcoated with any type of paint, lacquer, or Topcoat either:

Wet-on-wet after 5–10 minutes, or

After sanding with P500 once the primer has dried for 1 hour.

Safety:

For professional use only.

Wear a protective mask and work in a well-ventilated area.