The quick primer is very practical and easy to use.
It dries quickly and is very effective.
Product ready to use, nothing to add.
In cans or spray
Delivery 48-72H
Surfacing primers are used to fill and level a surface, erasing slight defects from the object or part. For more important defects, use our putties beforehand.
When most filler primers are two-component, i.e. they are usually mixed with 20 or 25% hardener + one thinner, the new Stardust "Surfacer 1K" primer is ready to use and one-component :
It does not require hardener and dries in the air very quickly.
It is ready to paint, without dilution.
This primer is designed to create a perfect surface after sanding.
Thanks to the fineness of its grain and its finish, it can be considered as a self-smoothing primer to be covered directly with paint within 30 minutes.
Offers : Aerosol 400ml / 125 ml graphic / 1 Liter / 5 Liters
Advantages :
-
Dry and sandable in 20 min
-
Ultra covering, self-smoothing
-
Very easy to sand, wet or dry
-
Easy to use
-
Keeps very well.
Mixture :
Ready to use
Substrates :
General primer for all surfaces.
For a guarantee of adhesion use a specific primer.
How to use it :
Gun from 0.8 to 1.7 mm
Airbrush 0.3 - 0.5 mm
Application in 1 to 4 coats
At 20°C, respect 60 seconds minimum between each coat.
Use from 15 to 25°C
Drying :
At 20°C, allow 10 minutes per coat before sanding.
Thickness :
20µm dry per coat
Apply up to 80 µm