FL2329 – High-performance fluorescent epoxy paint for indoor floors

A fluorescent epoxy paint designed for professional environments

FL2329 is a fluorescent epoxy paint developed to create highly visible markings on floors, equipment and obstacles in industrial buildings or those open to the public.

Thanks to its epoxy formulation, it offers excellent resistance to daily wear and tear, repeated footfall and common chemical attacks. It is an ideal solution where visibility must be maintained over the long term despite heavy traffic.

Unlike conventional fluorescent paints, FL2329 offers all the qualities of a genuine epoxy coating, resulting in a particularly robust finish.

What is it used for?

This paint is recommended for all indoor areas where safety, wayfinding or marking require excellent visibility.

It is particularly suitable for: traffic markings, safety zones, logistics warehouses, workshops, factories, covered car parks, garages, staircases, loading bays, public access buildings, plant rooms and storage areas 

Its high brightness immediately draws attention to obstacles, changes in level or specific areas.

A fluorescent finish with high visual impact

Fluorescent pigments absorb some of the ambient light and re-emit it as an extremely vivid colour.

FL2329 therefore enables markings that are much more visible than those made with traditional paints, even under industrial lighting.

The colours available are:

• Fluorescent yellow RAL1026
• Fluorescent green RAL6038
• Fluorescent orange RAL2005
• Fluorescent red RAL3026

These colours are particularly used for safety signage, traffic areas and spaces requiring immediate identification

Details of the FLUOPOX kit

This is a three-component epoxy system:

A: epoxy resin, B: hardener, C: fluorescent pigment paste.

The product is supplied as a pre-measured kit:

Component A: 1.125 kg 

Component B: 0.375 kg 

Component C: 0.100 kg 

The mixing ratio is therefore:

9 parts of component A + 3 parts of component B + approximately 1 part of component C

(the mixture must be used in its entirety within the recommended time of 40 minutes at 20°. Mix only the quantity required for the surface to be painted)

Excellent durability for floors

FL2329 has the characteristics expected of a genuine epoxy coating:

• excellent wear resistance 
• very high surface hardness 
• excellent adhesion 
• water resistance 
• good resistance to oils and common chemicals 
• resistance to alcohols, solvents, acids, petrol and tars 

This combination ensures that the fluorescent appearance of the markings is retained for a long time, even under intensive use.

Application

FL2329 is a three-component epoxy paint that is ready to be mixed before use.

It can be applied using:

• an epoxy roller 
• a brush 
• an air spray gun 

Application:

two coats (150–200 g per coat per m²) applied 24 hours apart, for a recommended film thickness of 330 µm

Coverage: 10 m² per coat per kg 

► technical data sheet available for download on this page

To achieve the best fluorescent effect, it is strongly recommended that FLUOPOX be applied to a white substrate or a white epoxy primer. This preparation significantly enhances the intensity of the fluorescent colours. 

For indoor use only

Fluorescent pigments naturally have low resistance to ultraviolet radiation.

For this reason, FL2329 is intended exclusively for indoor use and is not recommended for surfaces exposed to prolonged sunlight.

The benefits of FL2329

• genuine professional-grade epoxy paint 
• highly luminous fluorescent finish 
• excellent mechanical strength 
• high chemical resistance 
• ideal for high-traffic floors 
• low solvent content 
• durable finish 
• suitable for industrial buildings and public access buildings 
• available in fluorescent yellow, green, red and orange 

FL2329 is a high-quality solution for creating durable fluorescent markings in all indoor environments where visibility and durability are essential.