Crystalizer scooter kit

This set of paintings is specially prepared for vehicles the size of a scooter
and for users who do not have a spray gun.

It only includes spray paints:

3 x Metallic base sprays, aluminium colour
1 x 500ml bottle of crystalizer effect
1 x Black base aerosol
2 x Two components sprays of Candy clearcoat (colour of your choice)

The application method can be found on the PDF attached (in red)

 The color chart PDF below can be found for high definition download at the bottom of the page:

Summary of the steps:
1- Preparation of the bodywork: sanding with 800, degreasing and dusting

2- Application of the aluminum base by thin passes. Continue until the old paint is completely covered.

3- Clean the surface with dishwashing liquid and sand thoroughly with a green abrasive sponge

4- Spray quickly the crystalizer over the entire surface, in one go, to obtain a thick coat. Drain immediately and put in warm and dry atmosphere.

5. Apply a few ultra thin passes of black base

6- In the next 2 minutes, wipe gently with a soft and worn abrasive sponge to reveal the crystals.

7- After drying, applying the Candy clearcoat in 2 to 5 passes, with a 5 minutes interval between each.