FlakeBuster

The FlakeBuster is a special pneumatic gun for spraying dry powders.

Its large-diameter (1cm) aluminium nozzle enables to spray flakes or particles up to 3 mm.

The FlakeBuster is thus ideal to apply METAL FLAKES of any size, on a freshly painted and still wet substrate (binder or top coat).
Indeed, instead of mixing flakes to a transparent basecoat, then painfully applying them with a spray gun, it has proven to be very effective and convenient to stick them on a sticky surface.

Use and adjustment: connect the "Flakebuster" to a compressed air source (pressure from 1 to 2.5 bars), and adjust the air flow with the trigger of the gun. The straw flow can be adjusted with the wheel provided under the cup

The Flakebuster can be used for applying very efficiently our retro-reflective glass micro beads.

To stick the glitter, we advise to use a varnish + slow hardener (830 Ultra HOURS - direct link at the bottom of the page)

Caution: Never spray sharply jet of very thin and dry powders such as pearls or Diamond flakes.

This gun is not intended for spraying liquids.

Included with the Simple Kit:

- 1 Flakebuster
- 1 pressure regulator
- 1 male coupler ZBM-14

The Complete Kit contains:

Simple Kit 

+ 30g Metal-Flakes Super Bright Silver 0.2mm A0120

+ 30g Metal-Flakes Super Bright Silver 0.4mm A0121
+ 30g Metal-Flakes Super Bright Silver 0.6mm A0122
+ 30g Metal-Flakes Light Yellow Gold 0.2mm A0202
+ 30g Metal-Flakes Dark Jester Red 0.2mm A0314
+ 30g Metal-Flakes Sky Blue 0.2mm A0706
+ 30g Metal-Flakes Jade Green 0.2mm A0622
+ 30g Metal-Flakes Peach 0.2mm A0903
+ 30g Metal-Flakes Royal Blue Purple (violet) 0.2mm A0808
+ 30g Metal-Flakes Red Gold 0.2mm A0208

BS830 ULTRA HIGH SOLID CLEARCOAT

Find in clicking on the photo this below our Pistol sableur/spangle for the works of hypermarket.