Prices are tax included
Condition: New product
See full description See full description
Quantity - +
The minimum purchase order quantity for the product is 1
au lieu de
Add to cart
Send to a friend
Name of your friend * :
E-mail address of your friend * :
* Required fields
Send or Cancel
The 2K spray filler is perfect for filling irregularities and fine scratches due to sanding.It has many qualities such as fast drying and good holding and can be easily sanded.
It’s used for finishing parts prior to their painting.
Support: steel sheets, non-ferrous metals, carbon fiber, polyester putty, old paints
Packaging: 250ml AerosolYield: 0.25m²/aerosol for a 200µm coatVOC value: <840g/l of aerosol, propellant included.
Prior treatment:Sand the substrates and degrease them carefully. Work only with dust-free and clean surfaces.
Preparation: Shake the can before to perform a test.Coat application: Apply 100 to 450µm coats, in 2-5 passes,with a 5 minutes desolvation between each coat.
Dust-dry: 15 minSanding is possible after 2 to 4 hrs, depending on the thickness of the coat
Delay before painting the substrate:about 2 hours at a room temperature of 20 °C.
Filler putty x 4
There are no products selected for comparison.