Range of metallic effects paints in spraycan for automotive and motorbike
The aluminium versions produce a silver rough and shiny texture while the metal effects imitations display more sophisticated and sparkling finishes.
A black or white paint must be applied over the background, prior to use our metallic effects paints. View the PDF.
Composition : Solvent based, acrylic, to topcoat pre-thinned
Capacity : 400ml
Mix : mono-component,ready to use. Product to topcoat with our clearcoat in spray (refer to our section TOPCOAT)
Application : To apply on a black or white background (Check our basecoats in spray version in our section BASECOAT). The paint is applied in 4 to 5 ultra thin passes until the most intense colour is obtained. Do not make thick coats and wait 30 seconds to 1 minute between each pass (according to the temperature). Allow to dry 15 minutes : you will observe during that stage a mattifying, which is completely natural. The intense and glossy effect will appear after topcoating, which is mandatory.
|BACKGROUND COLORS (white or black)|
| || || || || ||BC59|
Precautions to take: In all cases, work in a well ventilated place or outdoors, wear an appropriate respirator against VCO and protective gloves. Never use spray paint near an open flame or other sources of flame (R12 product extremely flammable). Do not store spraycans near heat (+50°C).
The application to the aerosol is much less easy than gun, we strongly recommend using our 'SPRAY CAN GRIP HANDLE'
Gold paint - 8 True Gold Effect Colours
Our gold paints are available in 8 colours. These gold paints provide true gold effects, with their very fine particles made from pure metallic gold pearls.
4 main colours give 8 gold shades, depending on the background colour used, black or white, (see picture below, in high definition on the PDF file provided on this page). These gold shades range from Pale Gold (FINE GOLD) to Warm Gold (DAZZLING) through Yellow or Intense Gold.
Find our BASECOAT-compatible white or black base here.
You can obtain matt or glossy gold paint finishes, with the clear coat that will be applied over our GOLD Effect paints: we offer for this either matt or glossy topcoats.
Some application tips:
Always apply our paints using airbrush or spray gun, in 5 thin passes.
You can use any topcoat.
BC60: The world's thinnest aluminum automotive paint, with a pigment size of 5 microns (5μm = 0.005mm), easy to apply, to create a raw aluminum effect, clear and bright pigments, liquid paint and very covering.
To apply on black or white background.