Prices are tax included
Condition: New product
The CLEARGLASS glass and ceramic clear coat is applied directly on any surface (glass or ceramic) without the use of primer.Product available, shipping within 24 hoursSold in Kits:1.75L: 1L Topcoat + 500ml Hardener + 250ml Thinner
See full description See full description
Quantity - +
The minimum purchase order quantity for the product is 1
au lieu de
Add to cart
Send to a friend
Name of your friend * :
E-mail address of your friend * :
* Required fields
Send or Cancel
The CLEARGLASS glass and ceramic topcoat provides excellent direct adhesion on all glass and ceramic surfaces, without special adhesion primer for glassSubstrate preparationThe surface must be sound and free of contaminants or moisture.To achieve the best adhesion results, and for optimal wetting of the surface, it is recommended to treat with a flame in less than 30 minutes before application.Recommendations for useApply a first flash pass (thin layer), then apply 1 full coat after 2 minutesIt’s possible to apply 2 passes at 5-10 min intervals to obtain greater thickness.PHYSICAL CHARACTERISTICSDensity 20ºC: 1,00 - 1,25Delivery viscosity at 20ºC: 65 - 75 KU (Stormer)Dry extract (% weight): 50 - 60% (mixture with hardener)Dry extract (% volume): 40 - 50% (mixture with hardener)V.O.C. : 548 g/l (ready-to-use)Theoretical yield: 10 - 11 m2/L (45 my)Gloss 60 - 60º: 95 - 100%Recoatable: after 18 hrs.The system can last 200 hours in salt spray test.Shelf life in closed original packaging: At least 2 years from manufacture.Store covered in a cool, ventilated place avoiding exposure to sunlight.Recommended storage temperature: between 5 and 25ºC.
There are no products selected for comparison.