7080 UHS 2K PAINT FOR CAR BODYWORK - Porsche colour tone
All Porsche colour tones*
Warning: before confirming your order, please send us an email: email@example.com with the color code to validate it and check if the paint is available in 2K version. CAUTION: 2K Porsche PAINTS ARE AVAILABLE ONLY IN OPAQUE VERSION (NO METALLIC or PEARL PAINTS).
Order: -Choose the packaging type -Search for the colour code in our search engine -Precise the colour code in the comments box -The paint is delivered within 48hrs
UHS Porsche 2K Finish developed for refinishing works on car and truck bodies.
The 7080 Porsche lacquer is a top quality product that emits low VOCs. For gear painting refer to our 'Painting for Industry' Category.
UHS*: Ultra HigH Solid means that the rate of solids after solvent evaporation is higher. It allows for better packing, thickness and durability. 2K: This means that the product does not need to be topcoated; compared to 1K basecoats to be clearcoated, it's glossy, hard and resistant in one step.
Offers: the product is delivered as a complete kit that includes paint, hardener and thinner. Our offers include the tinting process to the manufacturer's colour tone by our colorimetry service the same day* - 1.650ml Kit - 8.5L Kit - Bi-component aerosols (minimum pack of 4) Each packaging offers you the selection of the standard/slow hardener version (for work in paint booth) or a fast version (small part or cold temperature)
Main qualities: Flexibility, high brightness index and resistance to scratches, gasoline, UVs.
7080 2K Porsche Paint application: It's a bi-component lacquer, meaning that the drying is done by polymerization using a hardener. The product does not dry at ambient temperature. Warning: once the hardener is added, use the product within 3 hours. Let stand for 15 minutes to allow the product to stabilize.
The mixing is done by volume (not by weight) in 1 or 2 passes: - 100 volumes of 7080 lacquer - 50 volumes of 5225 hardener / - Thinning will be depending on the painter's preference: about 10% of 710 thinner
Before application: Degrease thoroughly, clean, dust and prime the raw surface if necessary (if the surface is made of metal, plastic...) On old paintings, no primer is needed: a light sanding with 800 paper is enough to create adherence.
Application: Gun (1.2-1.5mm) in 1 or 2 passes (allow a 10min interval between each coat) Recommended dry film thickness: 605m
Hardeners: 5225 Slow/Normal: Suitable for partial or complete paint works in paint booth 5202 Fast: Suitable for cold temperatures or small parts
Specify your choice during your order in the Comments box
Density (Weight in kg/L) = 1.38 High solids content: 67% Product family: Polyurethane Acrylic (solvent-based product meeting European standards <420 g/L)
Theoretical coverage: for 605m sec: 9-10sqm/L
COLOUR BASES / Our colorimetric system is composed of 68 colour bases, allowing to mix all automotive colours in the world. 35 solid colours, 10 metallized colours, 20 pearl colours and 3 Xirallic colours
The pigments used in our bodywork paints are non-toxic, and provide strong resistance to UV light.
Our colorimetric team is trained to provide a real quality control on each of the colours reproduced.