MERCEDES car paint code - Car colour code in 1K solvent-based basecoat

Order your Mercedes paint in your choice of colour :
1 -  Choosing the packaging 
2 - Add to basket and order
3 - Fill in the colour code in the field provided and/or send the colour code by e-mail to INFO@STARDUSTCOLORS.COM in response to the validation e-mail 

To save your color code, add the product to your cart, then on the "My Cart" page, enter the color code in the box provided for this purpose:

► TUTORIAL HOW TO PAINT A CAR

Please contact us only if you are unsure about a code or a special Mercedes colour :
E-mail of the colour technician : colors@stardustcolors.com
Our technician will mix the Mercedes colour for you 
 Mercedes Premium paint : the StardustColors quality guarantee
HS (High Solid) paint quality
+ covering 
+ resistant
+ easy to apply
+ higher dry substance content
Professional Mercedes paint for decoration / touching up / complete finishing 
These Mercedes paints are 1K basecoats : once varnished, they are perfectly resistant to bad weather conditions (heat, cold, sun, rain)
They are easier to apply than « 2K finish » paints
How much paint do I need to paint my Mercedes vehicle or to do a touch-up ?
Yield of Mercedes paint :
In a can : 5 m²/L in 2 coats
Mercedes paint aerosol spray : 1 aerosol spray = 0.5 m² max

It's easy to find your Mercedes paint code :
Consult the guide at the bottom of the page

Application guide for Mercedes matt base paint :

Mixing :
It only concerns the "pure Mercedes paint + thinner" kit packaging
the paint in the kits is delivered pure and must be diluted appropriately (from 60 to 80%) with our V1 thinner delivered in the kit

Successful application of paint on a Mercedes vehicle : PRO advice

Solvent-based matt basecoats are particularly easy to apply : they can be applied with all types of spray guns, using thin coats (approx. 1.3 mm), the thinner they are, the faster they dry, and therefore the shorter the time between coats : at 20°C, the coats are applied in succession, whereas at cold temperatures, you wait 5 minutes.

Professional application method recommended :
One very thin coat (to see possible defects)
One (or two) coat(s) with an interval of 5 min.

For pearlescent/metallic : finish with half a coat with less pressure and with a little more distance to the substrate;
Topcoat:
Varnish after 15 minutes, with any of our car topcoats*.
You should not wait to varnish, because after 30 minutes, the adhesion is no longer possible in theory.
Check out our wide range of car topcoats

Car polish is available in aerosol clearcoat.
It is also available for those who use a paint gun, in a 875ml mini kit, or in a 1.5L kit of 830 UHS car clearcoat.

Know your Mercedes paint code (composed of three letters or numbers) by looking at your vehicle :
 Inside the engine bay.
 Inside the driver's side front left door.

Additional tips to ensure proper preparation before painting :
Background :
It is not always necessary to apply a primer. Often a simple light sanding of the old paint is sufficient (800 grit paper), to allow adhesion.
Dry well, degrease with our degreaser, (to avoid reactions due to invisible contaminants) then pick up the dust with our wiping pad. Under no circumstances should the existing paint be stripped.

Please note ! For some transparent pearlescent factory colours, it is necessary to apply a special coloured primer : some of these colours have little coverage or transparency.
For peace of mind and to ensure even and fast coverage, use our Stardust FAST Primer (available in different colour of grey). For damaged or puttyed backgrounds, apply our filler primer

Other technical data :
VOC g/L : <860 (diluted)
Exclusive use in professional booths