Audi colour code - direct gloss 2K paint in spray or set with hardener

Audi paint in direct gloss

All Audi color code since 1950
Kit including Audi tint lacquer + hardener + thinner

Quick order of Audi paint on the Stardust site

Choose your packaging (pot paint kit, or aerosol) then finalize the order
Once the order has been placed, reply to the order validation email, providing us with your AUDI COLOR CODE

Need to check your paint code? No problem, join our colorimetry department: colors@stardustcolors.com
Our database is complete and we formulate all Audi brand car colors

Where is the Audi paint code?

The code is written in a location:
To know the locations: click here

Audi vehicle to repaint
Direct gloss paint version All Audi colors*

*Warning ! it is not possible to create a direct glossy Audi paint in metallic or pearl shades: To order these Audi shades, go to the Audi paint page in matt base

CHARACTERISTIC OF AUDI 7080 UHS LACQUER FINISHES:

The UHS Direct Gloss Lacquer Finish is developed for the finishing (repairs, touch-ups, complete) of automobile and heavy goods vehicle bodies.

UHS *: Ultra HigH Solid means that the dry extract rate after evaporation of the solvents is higher. This allows for better packing, greater thickness, and better durability.
Gloss Direct: This means that the product does not need to be varnished; as opposed to two-coat basecoats, it is glossy, hard and resistant in a single step.

OUR AUDI PAINT OFFERS:
the product is sold as a complete kit which includes lacquer, hardener and thinner.
the offers include personalized tinting by our colorimetry department on the same day*

DETAILS OF THE "DIRECT BRILLIANT" OFFERS with tinting:
with yields in m² in 2 coats

- 0.375ml kit (1.5m²): 250ml lacquer + 125ml hardener
- 0.875ml kit (3m²): 500ml lacquer + 250ml hardener + 125ml thinner
- 1,650ml kit (6m²): 500ml lacquer + 250ml hardener + 125ml thinner
- 8.5 L kit (30m²): 5L lacquer + 2.5L hardener + 1L thinner
- 1 bi-component aerosol 290ml (0.5m² max)
- Set of 3 two-component aerosols 290ml (1.5m² max)

Audi Brilliant direct UHS lacquer, remarkable qualities:

Flexibility
High coverage and excellent filling power
High gloss index
High resistance to scratches, gasoline, ultraviolet rays.

IMPLEMENTATION of AUDI direct gloss paint

It is a 2-component lacquer: this means that the drying is done by polymerization using a hardener.
The product does not air dry. Caution: Once the hardener is added, the product must be used within 3 hours.
You can let it sit for 15 minutes to allow the product to stabilize.

THE MIXING is done by volume (not by weight) at 2:1:
- 100 volumes of well-stirred Audi paint
- 50 volumes of hardener
- dilution according to the preference of the painter: about 10% thinner
Hardener and thinner are supplied with the paint

Before application:
Thoroughly degrease, clean, dust and prepare the raw surface if necessary (if it is metal, plastic, etc.)
Our adhesion primers and our filling primers are present in the PRIMERS category
and also in aerosol version
On old paintings, in good condition, no primer is necessary: a light sanding with 800 is enough to create the grip.

Application:
Spray (1.2 - 1.5mm) in 1 or 2 coats (10min interval)
Recommended dry film thickness: 60µm for two coats

Drying:
Touch dry in 1 hour
Dry: 4-5h

Product family: Polyurethane acrylic (solvent-based product complying with European standards < 420 g / L)

Theoretical yield: for 60µm dry: 9-10m²/ L

STARDUSTCOLORS COLOR SERVICE

The pigments used in our bodywork paints are all non-toxic, and provide strong resistance to UV light.

Our colorimetry team is trained to provide real quality control of each of the colors reproduced, based on databases updated each month.

This product is offered for sale within the framework of Directive 2004/42/EC and the policy to reduce the use of solvents. The PDF is available at the top of this page.