RAL or PANTONE Tints in polyurethane 2K paint

RAL or PANTONE® Tints in polyurethane 2K paint version

Simply order the desired packaging, then
after the order is placed, email us the required RAL or PANTONE code

To find out all RAL or PANTONE Tints, download these colour charts below :

RAL COLOUR CHART
PANTONE® COLOUR CHART

or

Find our physical RAL color chart here
   

Important :

> A "2K Paint" can be realised only in so-called opaque hue (NO METALLIC or PEARL RAL 9006 - RAL9007 - RAL1035 - RAL1036 - RAL2013 - RAL3032 - RAL3033 - RAL4011 - RAL4012 - RAL5025 - RAL5026 - RAL6035 - RAL6036 - RAL7048 - RAL8029 - RAL9022 - RAL9023) : For this, visit our RAL or PANTONE Tints page (single-component 1K basecoat)

> Fluorescent RAL are to be ordered only in our category "fluorescent” (not gloss)
  

DELIVERY :

Shipped the same day if ordered before 11am

    

DESCRIPTION :

UHS 7080 Polyurethane Finish is a high quality, high gloss, ultra resistant lacquer.

It’s a low VOC product, suitable for many permanent applications (decorative, industrial, or machinery).

OUR OFFERS :

the product is sold as a complete kit that includes lacquer, hardener and thinner.

PACKAGING for our polyurethane lacquers with RAL or PANTONE® colour matching :
with yields in sqm in 2 passes

• 0.375ml Kit (1.5m²) : 250ml Lacquer + 125ml Hardener
• 0.875ml Kit (3m²) : 500ml Lacquer + 250ml Hardener + 125ml Thinner
• 1.650ml Kit (6m²) : 500ml Lacquer + 250ml Hardener + 125ml Thinner
• 8.5 L Kit (30m²) : 5L Lacquer + 250ml Hardener + 1L Thinner
• 1 two-component Aerosol, 290ml (0.5m² max)
• Pack of 3 two-component Aerosols, 290ml (1.5m² max)

MAIN QUALITIES :

• Flexibility
• Strong covering and filling capacities
• High gloss index
• Highly resistant to scratching, gasoline, ultraviolet rays.

       
APPLICATION TIP :

Warning : Once the hardener is added, use the product within 3 hours.
The product can be left to rest for 15 minutes, leaving it to stabilise.

   

MIXING is in volume (not in weight) at 2:1 ratio :
- 100 volumes of lacquer 7080
- 50 volumes of hardener
- Thinning according to the painter’s preference: approximatively 10% of thinner
The hardener and thinner are supplied with the paint

Before application :

Thoroughly degrease, clean, dust and prime the raw surface if necessary (if it is metal, plastic, etc.)
Our adhesion primers and our filling primers are available in the PRIMERS category and also in aerosol version
On old paints, in good condition, no primer is necessary: ​​a light sanding with 800 is enough to create adhesion.

   

Application :

Apply 1 or 2 coats using a spray gun (1.2 - 1.5mm nozzle), leaving 10 minutes between each coat
Recommended thickness for dry film : 60µm for two coats

   

Drying :

Dry to the touch in 1h/Dry : 4-5h E-225
(solvent-based product meeting European standards <420g/L)

______

The Colors of the digital color chart are given for information purposes only.

Colors made to order cannot be returned or exchanged.

Product does not comply with Directive 2004/42/EC Annex II B. Paint product recommended for customization and decoration work on vehicles, trucks, motorcycles, jet skis, bicycles, helmets or collector cars. Also suitable for all objects, equipment, furniture and surfaces properly prepared and/or primed