Mini pneumatic polisher 75 mm with plate and foams

In the field of body painting and repair, a mini polisher makes it possible to correct a defect (grain, dust or mark) on a targeted area, without resorting to re-varnishing.

On larger surfaces, such as a door, a hood, or a complete bodywork, a conventional size polisher (125 to 150 mm) is used, which is a relatively heavy tool, and which is used with two hands.

The mini polisher is a pneumatic tool (to be connected to compressed air) of high quality, intended for professional use, easy to handle, and practical for the rapid repair of defects on bodywork.

It produces a concentric rotation (not orbital) of 2500 rpm* maximum

It is equipped with a trigger to trigger the rotation and an adjustment wheel.

*rotation per minute

Offers :

Or

The mini polisher saves time, saves material and maximizes efficiency for the body painter.

Comparable to equipment from the biggest brands, this KA3025 mini polisher is a resistant, durable and high-performance tool, suitable for intensive use.

Easily eliminate micro defects on a clearcoat in 5 min

With the MICRO REPAIR kit, it is possible in just 5 minutes to remove a defect on a clearcoat, in two stages

• Wet sanding at 1500, then 3000 with the pneumatic mini orbital sander
• Polishing with sheep's wool, then black foam

The action of the KA3025 mini polisher comes just after sanding with the KA3301 mini sander, and allows you to find the original shine of the varnish

Recovering a high level of "gloss" or shine after fine sanding is made possible by the action of the polishing paste, by rotation at a moderate speed which allows a rise in temperature and a rise in shine of the dry clearcoat

Plates for polisher 75mm

We offer an option of 2 types of 75 mm plates to adapt to mini polishers, with a normal type (yellow) and a superior type, soft (red)

Polishing paste

To work with the mini polisher, it is necessary to use a polishing paste such as Polarshine