KTM Motorcycle paints – 1K solvent-based basecoat Factory colours

Our team can mix for you most of the color codes of the KTM brand.
To order your KTM paint it is necessary to have either the color code of your motorcycle or the name of the color.

If you don't have this information then we invite you to search for these references on specialized forums or at your nearest dealer. In our KTM database it is not possible to sort by model, among the dozens of existing paint codes.

Order your KTM paint in a few clicks :

You just have to choose one of the proposed packaging, either in paint aerosol spray or in can, for those who have a spray gun
> Your KTM Factory colour code must be sent to us by email after ordering or in the small box during the shopping cart stage.

If you have any question please write us here colors@stardustcolors.com : We will be able to check your code or confirm we have the formula in our color software. We answer emails 7 days a week

Details of the offer

For orders placed today before 3pm, you will receive your package in 48 hours.
The type of paint we offer is a professional solvent-based paint.
It is a one component paint, without hardener, ready to paint or with its thinner separately, depending on the formats.

For motorcycle painting, the painting system is always in at least 2 steps :

• Paint

• Clearcoat

In addition, a specific undercoat can be added in the case of a special color called 3-coat. In addition, a base color is usually recommended. Most modern motorcycle colours are not completely opaque and it is advisable, to obtain the best result, to apply a primer.
This not only provides a consistent background colour, but also levels and prepares the background, removing minor surface defects. Find this product at the bottom of the page, Just like the clearcoat.

How much paint should I order to paint a KTM motorcycle ?

In general, KTM motorcycles have a limited amount of surface, with a tank, covers, and guards, which represents a maximum of 1.5 m².
The yield or the general coverage of our KTM paint is :
1L ready to use for 4 m²
1 aerosol spray = 0.4 m²*

* Aerosol sprays are still the least economical method of painting because most of the volume of the aerosol is gas.

To paint your fairings, here are the different important or optional* products you need :

• cleaning thinner*.

• 500* abrasive papers

• degreaser*.

• sticky pad*.

• primer

• clearcoat (imperative) : See bottom of page

Do you need a primer ?

To ensure a smooth, scratch-free background with no steps with the presence of stickers, you can apply one or more coats of primer. The default color is medium gray. Our color technician will adapt the color of this primer to your code. Your primer should always be sanded with a 500 grit sandpaper

Mixing
Pure paint : add 50-70% of V1 thinner included in the kit
diluted paint 250 and 500 ml : ready to use

Application :

On P500 sanded, clean, sound, degreased, dust free background :
Just before painting, pick up the dust on the part with our sticky wiping pad, without pressing.
Use a 1.0 mm to 1.4 mm gun with a pressure of 2 to 3 bars
Work between 15 and 25°C preferably
Apply 2 to 3 thin or medium coats with an interval of 5 minutes.
Do not apply thick coats
Apply the clearcoat after 10 minutes and before 30 minutes. Beyond that time, sanding is necessary.

Varnishing

It is done in 2 glossy coats spaced 7 to 10 minutes apart
we offer a wide range of high quality clearcoats in our automotive clearcoat category

Send your questions to our technician who will be happy to help and advise you in your project : tech@stardustcolors.com