Paint kit for painting IRON MAN in red and gold – Spray can or airbrush

For anyone who wants to paint a figurine or 3D print of any size based on the colours of the superhero Iron Man, we have created three complete kits for creating the black background, followed by gold, gunmetal grey and metallic red paints.

5 kits available

1 - the aerosol kit 

2 - the water-based airbrush kit (standard or XL)

3 - the solvent-based airbrush kit (standard or XL)

Varnish: Our products do not contain varnish. Varnish may be necessary to create protection against weathering and abrasion. For display figurines or sculptures, this is not usually necessary. Varnishes are available inglossy finishes or matt finishes, and we leave this choice up to the user. 

All our metallic paints have a satin matt finish. 

Offer details

IronMan spray paint kit

For those who do not have a paint sprayer or airbrush, here is the Iron Man red and gold spray paint kit, which contains:

• 1 P410 Black 2C primer * (two-component aerosol with hardener) 
• 1 aerosol of Premium BC71 gold paint
• 1 can of IronMan Red BC81 metallic paint 
• 1 can of Panther Black Red BC24 metallic paint 

Suitable for 0.75-1 m² max.

* Suitable for all types of 3D printing materials, prepared and primed plastics, metals, wood, and old paint.

Spray paints are applied in thin layers and left to dry completely before being sanded with a fine abrasive sponge to apply adhesive masking and then covered with the next coat of colour.

First apply the black primer, then the dark metal areas, followed by the metallic red colour, and finally the lightest colour, i.e. gold.

**The black primer is a two-component aerosol: activate the hardener located at the bottom of the aerosol and then the product can be used for up to two hours. It is a thick product that is applied in two coats and must then be sanded with P500 sandpaper.

***

Iron Man Hydro water-based airbrush paint kit

For those who own an airbrush or any type of spray gun (all nozzle types), we offer a set of water-based paints from the WPU STARDUST PRO range that are solvent-free, odourless and provide a high-quality satin matt finish.

The standard kit contains:

• 1 x 60ml primer in matt RAL 7016 grey WPU505
• 1 x 60ml SOLAR GOLD WPU108 paint 
• 1 x 60ml Iron Red WPU112 metallic paint
• 1 x 60ml Dark Metal WPU130 metallic paint

Suitable for a maximum area of 0.75 m².

Iron Man XL Hydro kit (for a life-size sculpture)

The XL kit contains:

• 1 litre of RAL 7016 matt grey primer WPU505
• 1 litre of SOLAR GOLD WPU108 gold paint
• 1 litre of Iron Red WPU112 metallic paint   
• 1 125ml Dark Metal WPU130 metallic paint   

Suitable for 2.5 m² 

* Suitable for all types of 3D printing materials, prepared resins, wood and old paintwork

Water-based paints can be recoated without sanding for 48 hours. At a temperature of 20°C, they are touch dry in one hour and can therefore be covered with adhesive masking tape at this point and then recoated with the next coat of colour. Tools can be cleaned with water. The paints are ready to use.

***

Iron Man PRO solvent-based airbrush paint kit

The products are compatible with all types of airbrush nozzles. Solvent-based paints are thinner and dry very quickly. Please note that these products are flammable and harmful. Consult the safety instructions before use.

Kit contents:

• 1 primer*  125ml Grey 1C matt GPH103 * 
• 1 black base paint GPH010
• 1 125ml Premium Gold 21µm paint  BC71 
• 1 125ml IronMan Red metallic paint BC81 
• 1 125ml Panther Black metallic paint BC24

suitable for 0.75-0.1m² max

The XL Pro kit contains (for a full-size sculpture)

• 1 x 750ml primer* P410 *  (contains 500ml primer + 125ml hardener + 125ml thinner)
• 1 x 500ml black base paint GPH010
• 2 x 125ml Premium Gold 21µm paint  BC71
• 1 x 500ml IronMan Red metallic paint BC81
• 1 x 125ml Panther Black metallic paint BC24

suitable for 2-2.5m² max

Applying solvent-based paints from the IRON MAN kit

Solvent-based paints must be dry and sanded before being covered with the next coat of colour, starting with the darkest colours and finishing with the lightest colours (gold). 

The first step is to apply a two-component primer (mix 4 parts primer + 1 part hardener + 1 part thinner – pot life: 2 hours max), which should be left to dry for two hours at 20°C before sanding with P500 sandpaper. Next, apply the dark metallic colours and reds, again in very thin, repeated coats until the base is covered. 

The paints are ready to use and can be covered after sanding with an abrasive sponge and allowing one hour for drying. Adhesive masking tape is then applied and the next colour is painted on.

* Suitable for all types of 3D printing materials, prepared resins, wood and old paintwork.