Kit Cel-Chrome TopCoat

The CELCHROME clearcoat is the only clearcoat recommended for chrome plating clearcoating.

The unique composition of CELCHROME allows it to:
- Adhere directly to silver, preventing peeling and ensuring a resistant and durable finish — a guarantee of quality for the end customer.

APPEARANCE: Clearcoat with optical brightener

PROPERTIES: Provides antioxidant protection for silver and ensures direct adhesion on ferrous or non-ferrous metals without the need to use primers.

Theoretical coverage: 12 m² / 1 kg at 25 microns dry film thickness

Substrate preparation: The silver metallisation layer must be perfectly clean and dry (1 h to 24 h).

Product preparation: (dosing by weight)
100 parts CELCHROME + 15 parts HARDENER H410 + 30–40 parts PU THINNER

Service life of the mixture at 20 °C: 24 h

Conditions of application in a workshop: 15-25 °C

Application method and settings: Pneumatic spray gun. Avoid — especially during summer — applying excessively thick coats with too short an interval between passes (risk of bubbling).

Application: Apply 2–3 thin passes, leaving 30 seconds between each, then add 1 or 2 glossy coats.

Drying: ambient air at 20 °C - Touch-dry: 30 min

Recoating: after 6-8 hours and within 24 hours.

Forced-air oven: 10 min. Allow 10 min solvent evaporation at ambient temperature, then bake at 60 °C for 30 min.

Offers:

Kit CELCHROME 1.4 L (1 L Topcoat + 0.15 L H410 Hardener + 0.25 L Thinner)

Kit CELCHROME 5.6 L (4 L Topcoat + 0.6 L H410 Hardener + 1 L Thinner)

Important!

The mixture must be used promptly. Avoid using it when it is close to the end of its pot life. This depends greatly on the ambient temperature. Using the clear coat at or beyond its maximum pot life will result in a loss of adhesion for chrome or silver finishes, and will also produce a less hard clear coat.

It is strongly recommended to overcoat with a scratch-resistant 2K clearcoat to provide good mechanical resistance against abrasion.


Product (hardener) containing isocyanates with a free monomer content of less than 0.1%. (REACH Regulation (EU) 2020/1149)