Putty in tube PPG 200ml one-component VBA Beige Stopper Acrylic A242

V.B.A. putty Beige is a putty in a tube, called “Stopper”, with a practical one-component acrylic formula.

It is a light putty, suitable for the rapid repair of small surfaces, both in the field of bodywork, 3D printing, and in the field of model making, plastic arts and creative hobbies.

It is an essential product for all modelers making 3D prints. Discover all our products and tools dedicated to the practice of 3D printing

It allows you to quickly repair and fill scratches or imperfections.

PPG V.B.A. putty Beige can be used over paint, primer, two-component putty, and is ideal for repairing minor defects.

It is a beige colored putty specially designed for painting work.

which can be applied directly to steel

► On 3D printing FDM plastic or SLA resin, PPG putty is perfectly suitable after sanding with P180 or P220

Tube putty is not suitable for aluminum, galvanized metal and plastics

It is ideal for fiberglass and GRP, polyester primers/putties

Preparing the support

In all cases, select PPG D8434 or D837 cleaner For fragile materials and paints. PPG offers a complete line of cleaning and degreasing products

Ensure the substrate is thoroughly cleaned and dried before and after preparation work.

► Application Guide

Ready to use. no hardener required for this easy-to-use, lightweight, practical, quick-drying one-component putty.

Note: A242 V.B.A putty should preferably be applied in several thin layers, leaving a flash-off interval between each of 5 to 10 minutes at 20°C, rather than applying a maximum thickness in one go. This prevents cracking or shrinkage.

Application must be done using a plastic spatula or metal spatula.

Drying and covering

Can be sanded and recoated after 30-60 minutes of air drying.
Of course, depending on the ambient temperature and the thickness of the film.

Allow drying at room temperature, and do not use infrared lamps

Sanding

Use a P220 abrasive sheet then a P400 or P500 abrasive sheet before painting.

Use a P320 sanding sheet before priming.

Only dry sand