Our categories


New product

Black/Colour Effect
5 colours available
In stock

See full description

- +

check Plus que 1197 In stock !

200.45£tax incl.

Secure payment with:logopaiement
More info

The kit includes all products needed to complete the three-step paint of your motorbike body part

- Background colour

- Black Interference effect paint Stardust® (choose from the drop-down menu)

- Topcoat

Products included:

- Background: 1L of pre-thinned black base

- Black Interference Stardust® : 1L pre-thinned

- Topcoat: 2L Kit, WET SPEED type (our best clear coat. It offers fast drying, outstanding thickness and gloss, and ease of application)

The kit does not include the abrasives and the adhesives

Available colours (see photos): Gold, Green, Blue, Purple, Red

The following summarizes the application method:

Prepare the substrate: over an old paint, do not strip the surface. Sand lightly at 800.

Make sure the background is healthy: it must be free from grease, water and dust.

Apply the products with a 1 to 1.5mm nozzle spray gun.

Apply the black base in thin passes; repeat until the old background is completely covered.

Follow immediately with the black interference paint, in thin coats but without excess paint over the surface:

Apply just the quantity needed; do not cover the black base completely, 2 to 3 light coats are enough.

Immediately thereafter, apply the topcoat.


The black base and the Black Interference base are ready for use, no need to add hardener or thinner.

For the mixing ratio of the Wet Speed clear coat, they are in a volume ratio of 1:1. There is no thinner.

The Wet Speed mix can be used for 25 minutes; count 45 minutes for through drying for the topcoat!

It can be applied in 1 to 3 coats, allowing a 5 to 10 minutes desolvation interval.

12 other products in the same category

Recently Viewed