RAL or PANTONE® Colours in 2K Matt Polyurethane Paint

RAL or PANTONE® Shades in 2K Matt Polyurethane Paint Version

Do you want to know all the RAL or PANTONE shades ?

Find our physical RAL color chart here

or download these color charts below :
RAL COLOR CHART
PANTONE® COLOR CHART

To save your color code, add the product to your cart, then on the "My Cart" page, enter the color code in the box provided for this purpose:

Important : 
> For the following RAL (pearl or metallic version), 2K Matt Paints are not available :  RAL 9006 - RAL9007 - RAL1035 - RAL1036 - RAL2013 - RAL3032 - RAL3033 - RAL4011 - RAL4012 - RAL5025 - RAL5026 - RAL6035 - RAL6036 - RAL7048 - RAL8029 - RAL9022 - RAL9023.

The same applies for the fluorescent colours, RAL1026 - RAL2005 - RAL2007 - RAL3024 - RAL3026 - RAL6038, which can only be ordered in our fluorescent category and not in gloss version

Kit PACKAGINGS with the corresponding RAL or PANTONE® colour :

-1.35L Kit : 1L Paint + 200ml Hardener + 150ml Thinner
-7L  Kit : 5L Paint + 1L Hardener + 1L Thinner

2 Degrees of mattification :

MAT 20°, SEMI MAT 40°

APPLICATION TIPS 

Warning : Once the mixture 2K Matt Paint-Hardener is made, the mixture useful life is 2 hours.
We recommend to allow the mixture to stand for 5-10 minutes to stabilise the product.

MIXING ratio : by volume (not by weight) 5:1 :
- 100 volumes of Tinted Paint
- 20 volumes of Hardener
- Thinning : approximately 10% (according to the painter’s preference) 

Hardener and Thinner are supplied with the Paint Kits.

Before the application :
Preparation of the raw surface (plastic, metal, etc.) : Degrease, clean, dust and apply a primer if necessary.
Our adhesion primer and filler primers can be found in the PRIMERS category . They are also available in spray version 

On old paints (but in good condition), no primer is necessary : a light sanding at 500-800 grit is enough to recreate adhesion.

Application :
With Spray gun (1.2 - 1.5mm) 

Apply 1 to 2 thin passes 
The 2K Matt Paint dries extremely fast and successive passes can be applied without waiting interval between each coat.
The matte effect can be observed during the drying process.

Drying (20°C) :
- Dry to the touch : 30min
- Through-drying : 4h 

    
(solvent-based product which complies with European Standards < 420g/L)

The Colors of the Digital Color Chart are given for information purposes only.

Colors made to order cannot be returned or exchanged.

Product does not comply with Directive 2004/42 / EC Annex II B. Paint product recommended for customization and decoration work on vehicles, trucks, motorcycles, jet skis, bicycles, helmets or collector cars. Also suitable for all objects, equipment, furniture and surfaces properly prepared and / or primed