Sub-micron air cleaner for KMA compressed air

"Intermediate" professional model:

• Economical

• High performance

• Total filtration

It provides a flow rate of 209 cubic meters per hour, which is well above the recommended minimum flow rate for vehicle paint work.

Read our article on 'installing a compressed air system

Uses:

Bodywork painting with spray guns, pneumatic tools, compressed air system

The FILTRA KMA filters water, dust, and grease.

Innovative technology:

Compressed air entering through the inlet is introduced into the guide plate, which features evenly distributed diagonal teeth similar to fan blades. The high-speed compressed air produces a strong rotation tangential to the teeth. Water, oil, and larger impurities mixed with the air are separated by strong centrifugal force and projected onto the inner wall of the water tank, flowing to the bottom. The extracted compressed air is then filtered through a filter element to remove small solid particles and returned to the outlet. The umbrella-shaped water blocking plate divides the water tank into two parts: the lower part maintains a static pressure zone, preventing the high-speed rotating airflow from sucking water and oil from the bottom of the tank. Water and oil accumulated at the bottom of the tank must be drained through the drain valve, and the air filter must be installed vertically with the tank facing downwards.

Simple version connections :

1/2 inch air inlet
1/2 inch air outlet

KMA Simple Filter Connection Plan (fittings and hoses not included):

Click here for our AD12-14 1/2 to 1/4 fitting
and here for our HFH-10 pneumatic hose

Master version connections (fittings and pipes not included):
The MASTER version (or another name as you wish) is equipped with a 1/2 pneumatic inlet valve and 2 outputs: a 1/4 male pneumatic valve and a 1/4 female "quick clip" connector

A bodywork paint filter must always have an inlet of 3/8 minimum or ½ to allow sufficient flow. The output can measure ¼.

Connection in the paint booth.

Find all our quick pneumatic fittings here

Filtration accuracy:

Two 1µm + 0.01µm cartridges for total filtering of large particles and sub-micron particles

Grease, dust and moisture filtration

Features

Setting the pressure at 0.05 ~ 0.85MPa (5 psi ~ 125 psi)

Maximum working pressure: 1MPa (150 psi)

Guaranteed resistance to pressure: 1.5MPa (220 psi)

Working temperature; -5 ~ 50 °C

Filter capacity: 120 ml

Weight: 1 kg

Dimensions Simple Model : Length: 27cm Width: 20cm Depth: 5.5cm (9.5cm with the pressure gauge mounted)

Dimensions Master Model: Length: 40cm Width: 20cm Depth: 5.5cm (9.5cm with the pressure gauge mounted)

2 wall fixings included

Polycarbonate tanks

Regulator: Yes

Pressure gauge: Yes

Protective cover : Yes

Length: 27cm

Width: 14cm

Depth: 5.5cm

Nominal flow rate: 123 CFM* ~ 3483 L/min ~ 209 m3/h

*1 psi = 0,069 bar

*CFM = 1 Cubic foot/min = = 28.32 L/min = 1.7 m3/h