Our categories

THE INDISPENSABLE

UHS 830 CLEARCOAT 1L or 5L + HARDENER + THINNER

New product

BS830 ULTRA HIGH SOLID CLEARCOAT

The kit includes topcoat, hardener and thinner

Delivery in 48h

See full description

- +

check Plus que 1190 In stock !

In Stock50.30£tax incl.

Secure payment with:logopaiement
 
More info

ULTRA HIGH SOLID CLEARCOAT BS830

This automotive clear coat is superior to the HS topcoat: it’s more hard and glossy. It’s also more eco-friendly and in compliance with the Directive to reduce VOC (contains less than 420g/L)

The name Ultra High Solid refers to its concentration in dry extracts: it has a better coverage performance and density.

It’s easily applied, in two consecutive passes or let 5 minutes between each coat.

See technical data sheet in PDF attached.

830 Clearcoat is compatible with the whole automotive paints in general, but also with all our special effects paints.

Application : The clear coat has a 3:1 mixing ratio with catalyzer/hardener

The offer includes

1L of topcoat , 330ml of hardener and 125ml of thinner

5L of topcoat , 1660ml of hardener and 1L of thinner

Coverage:  The 1.5L kit allows to topcoat a small size car with 2 coat

Cooking with infrared: 10 (short waves) to 15 minutes (medium waves)
Drying at 20° 16h
Baking in the paint booth at 60°: 30 minutes
► find the product technical sheet for download at the bottom of the page (PDF)

High Solid.automotive acrylic topcoat.

Mix instructions : 100 parts clearcoat for  33 parts of hardener, + 5 to 15% thinner 

Harmful product. Contains : Iscocyanates. For use by professionals only


Question: How to choose between slow, normal or fast?
Answer: The choice of the appropriate type of hardener will depend on the season, and above all on room temperature, or on the spray booth temperature:
Slow for summer, when the temperature is between 25 and 35 °C
Normal, when the temperature is between 15 and 25 °C
And Fast, in cold weather, between 5 and 15 °C

Question: What happens if we don't pick the right hardener?
Answer: If you choose in summer a hardener which is too fast, it will show wrinkles (orange peel) and will not shine, as it has not had sufficient time to tighten, while if you pick a slow hardener in winter, it will not dry and will drip.

Advices for our client :
We have a very large range of automotive clearcoats, and it can be confusing to know which one to choose .
To resume, we can say that our 2 best clearcoats are
- the "Wet Speed clearcoat", actually the most innovative and technology avdvanced tocoat
- and our UHS 830: widely used in Europe and Russia for almost 10 years, this excellent car clearcoat has proved excellent resistance and gloss lasting in various conditions, from the extrem summer heat of Greece and Spain, to the very severe winter of Russia.


Write a review

UHS 830 CLEARCOAT 1L or 5L + HARDENER + THINNER

BS830 ULTRA HIGH SOLID CLEARCOAT

The kit includes topcoat, hardener and thinner

Delivery in 48h

Write a review

 
Comments(1)
09/25/2013

Franchement tres bien ce vernis ! Bon tendu, plus brillant. Par contre vernir un petit vehicule avec un seul kit... va falloir m expliquer. J ai vernis une Mini avec, et j ai utilisé 1 kit et 1/2.

  • Was this comment useful to you?
  • (0) (0)

Write your review!

Accessories

30 other products in the same category

WE ALSO RECOMMEND YOU

Recently Viewed

Menu