Our categories

THE INDISPENSABLE

CANDY PAINT - MOTORCYCLE KIT

New product

Complete Kit for Motorcycle

 

Choose your colour !

Specify its reference by email

See full description

- +

check Plus que 164999 In stock !

In Stock216.00£tax incl.

Secure payment with:logopaiement
 
More info

The Candy technique uses translucent inks to create luminous and deep colours effect.

 

The application method is explained in details in our PDF documents, and on our CANDY Stardust®  product page.

 The color chart PDF below can be found for high definition download at the bottom of the page:

The key points:

Final Candy aspect = Type and colour of the undercoat + Colour and thickness of the coloured Candy clear coat

 

The kit comes with:  

 

•  1L Black or White for the colour of the background

•   1L Pearl or metallic Candy undercoat + 1L thinner (Aluminium Coarse by default)

•   1L High Solid Candy clearcoat + 500ml hardener + thinner

 

Composition : solvent-based paints

Selection of candy undercoats and clearcoatsStardust® :

See our PDF colour chart

 

The choice of the Candy undercoat and clear coat must be specified in the comments when putting your order or by email. We are always at your service for further informations, by preference by mail.

 

Application Method

 

Use a paint gun with a 1.0-1.4mm nozzle

 

1 - Apply the black basecoat. One-component, ready-to-use pre-diluted paint. Apply a few thin coats. a drying interval of two minutes is sufficient between each coat

Within 10 to 30 minutes maximum, follow with step 2

 

2 - Apply the metallic or pearlescent paint, with a few very thin coats until the bottom is covered (black or white). One-component, ready-to-use pre-diluted paint. A drying interval of one to two minutes is sufficient between each coat.

Within 10 to 30 minutes maximum, follow with step 3

 

3 - Prepare the Candy clearcoat with 100 parts of clearcoat + 33 parts of hardener (volume or weight) + 5 to 10 parts of thinner

Apply the Candy clearcoat in two to three coats. Respect a drying time of 7 to 10 minutes between each layer. If you want to apply a larger number of layers, it is better to apply these layers the next day after complete drying and sanding at 500 with water

 


Tips for painting motorcycle fairings:


It is not necessary to apply a primer when painting motorcycle parts: each plastic or steel fairing has already been painted in factory. The substrate is not of plastic or steel, but good paint/topcoat. Therefore, no primer is required to create adhesion on the surface. A simple light sanding with 800 or 1200 and water is enough.
If the surface is very damaged, or if stickers remain under the clearcoat, our filler can be used, in a few layers, to have a perfectly levelled surface after sanding.

If the "base mate 1C" version is chosen, the varnish is not included in the offer. The varnish must be purchased separately
>> CLEARCOATS



 
Download

CANDY_ APPLICATION

CANDY_ APPLICATION

FDS Candy Clearcoat

FDS Candy Clearcoat

CANDY LIGHT FASTNESS

CANDY LIGHT FASTNESS

Candy Catalog 2021

Candy Catalog 2021

Write a review

CANDY PAINT - MOTORCYCLE KIT

Complete Kit for Motorcycle

 

Choose your colour !

Specify its reference by email

Write a review

Accessories

14 other products in the same category

Recently Viewed

Menu