Our categories

THE INDISPENSABLE

Glass Ceramics Clear Coat - CLEARGLASS

New product

The CLEARGLASS glass and ceramic clear coat is applied directly on any surface (glass or ceramic) without the use of primer.

Product available, shipping within 48-72 hours

Available in 2C solvent or 1C water version

See full description

- +

check Plus que 998 In stock !

In Stock43.20£tax incl.

Secure payment with:logopaiement
 
More info

The CLEARGLASS glass and ceramic topcoat provides excellent direct adhesion on all glass and ceramic surfaces, without special adhesion primer for glass

This specialized adhesion clearcoat for glass exists in 2 versions:
ClearGlass Hydro: One-component, solvent-free gloss clearcoat
ClearGlass solvent-based: old version, two-component glossy solvent-based clearcoat

Sold in different Kits:


Solvent version
1.75L: 1L clearcoat + 500ml H420 Hardener + 250ml Thinner
8.5L: 5L clearcoat + 2.5L H420 Hardener + 1L Thinner


Hydro version
1L – 5L – 20L

Glass clearcoat CLEARGLASS HYDRO


This latest generation clearcoat is an innovation offering a high level of performance in terms of adhesion, shine and resistance, with a VOC level of less than 2%.
It also offers excellent resistance to all chemical attack factors (alcohol, detergents, acids) and good resistance to abrasion.

ClearGlass Hydro clearcoat is also an extremely simple clearcoat to apply, in one coat directly on the prepared glass (dry, degreased, dusted)
Its application is possible both by brush and by spraying.

Mixture: ready-to-use varnish
Packaging: we offer small formats (1L and 5L) and also formats for professionals or industrialists, with decreasing prices depending on the quantity.
Coloring: We offer compatible transparent concentrated dyes for hydro glass clearcoat.

Solvent clearcoat for glass: Two-component polyurethane version



Substrate preparation
The surface must be sound and free of contaminants or moisture.

To achieve the best adhesion results, and for optimal wetting of the surface, it is recommended to treat with a flame in less than 30 minutes before application.


Recommendations for use
Apply a first flash pass (thin layer), then apply 1 full coat after 2 minutes

It’s possible to apply 2 passes at 5-10 min intervals to obtain greater thickness.

Mixed :
By weight or volume, mix 100 parts clearcoat to 50 parts hardener.
Dilution: possible between 5 and 20%
Mixture pot life: 40 min at 20°C

It is possible to color the direct adhesion varnish on glass and ceramics

using opaque shades or transparent dyes




PHYSICAL CHARACTERISTICS
Density 20ºC: 1,00 - 1,25
Delivery viscosity at 20ºC: 65 - 75 KU (Stormer)
Dry extract (% weight): 50 - 60% (mixture with hardener)
Dry extract (% volume): 40 - 50% (mixture with hardener)
V.O.C. : 548 g/l (ready-to-use)
Theoretical yield: 10 - 11 m2/L (45 my)
Gloss 60 - 60º: 95 - 100%
Recoatable: after 18 hrs.

The system can last 200 hours in salt spray test.

Shelf life in closed original packaging: At least 2 years from manufacture.

Store covered in a cool, ventilated place avoiding exposure to sunlight.

Recommended storage temperature: between 5 and 25ºC.


Write a review

Glass Ceramics Clear Coat - CLEARGLASS

The CLEARGLASS glass and ceramic clear coat is applied directly on any surface (glass or ceramic) without the use of primer.

Product available, shipping within 48-72 hours

Available in 2C solvent or 1C water version

Write a review

30 other products in the same category

WE ALSO RECOMMEND YOU

Recently Viewed

Menu