![\"car](\"https:\/\/www.stardustcolors.co.uk\/blog\/wp-content\/uploads\/2016\/11\/mon-bateau-2-300x190.jpg\")
<\/p>\n<\/p>\n
I wish to create a white and red pearl paint with glitter on my Supra Comp TS6 Ski Boat. The boat measures 6m by 2m with a hull whose height is of 0.70m. The red band measures 0.30m. Can you give some tips on how to proceed and which painting to choose\u00a0?<\/p>\n
Sincerely, Michel.
\nStardust Customer<\/p>\n
<\/p>\n
Can we use “car paint” on a boat and will it stick ?<\/strong><\/p>\n Solvent-based and polyurethane car paints<\/strong><\/a> are suitable for structures in marine environments. Our primers, including the filler primer surfacer, can be applied over a gel coat (after sanding with 400 grit abrasive paper). The bottom will be blocked, smoothed and improved. <\/p>\n There are mainly 2 ways to paint a boat with a metallic effect, pearlescent or not:<\/p>\n – Metallic effect paints<\/u><\/strong><\/a> or diamond pearl effect paints<\/u><\/a><\/strong> <\/p>\n In all cases, it is necessary to apply all over the boat a filler primer surfacer, in thick passes, to be sanded once dry. I wish to apply a paint with glitter, something unique that stands out?<\/p>\n We advise then to apply all over the boat a DIAMOND paint, White or Cosmic White. <\/p>\n <\/p>\n Once the white Diamond paint is dry, apply There are two options available to you: Once the red strip is painted, remove the adhesives It is important to topcoat within 30 minutes to ensure cohesion between the layers.
\nIf you follow the substrate preparation and sanding procedures, all the layers (primer\/paint\/topcoat) that form the “multiple layers” of the paint will be bound and perfectly protected from water and peeling.
\nYou can use any effect paint on a boat without worrying about resistance to salt and water. It is actually the final topcoat (polyurethane or epoxy) that will serve as a barrier against the water. Automotive clear coats are perfectly waterproof and UV resistant.<\/p>\nHow to paint a boat with pearl or metallic paint?<\/strong><\/h2>\n
\n– Pearlescent glitter<\/u><\/strong><\/a> to be mixed in varnish or in a transparent GelCoat<\/p>\n![\"car](\"https:\/\/www.stardustcolors.co.uk\/blog\/wp-content\/uploads\/2016\/11\/car-paint-boat-300x170.jpg\")
What can I use as a primer ?<\/strong><\/h3>\n
\nThis primer will serve as a white background and also help to block and perfect the bottom.
\nThis product includes a very resistant hardener, that can be found in the PRIMERS section. A 1.5L Kit covers 4 to 5sqm in two passes. A 6L Lit covers 20 to 46sqm in two passes. This primer is applied using a spray gun with a nozzle of 1.4 or 1.7mm minimum<\/p>\n
\nIt\u2019s a very iridescent paint with glitter effect.
\nIf you want us to customize this Diamond paint with flakes larger than 500\u00b5m (0.5mm) instead of 100\u00b5m, it is possible.
\nThis paint is applied using a spray gun with a standard nozzle of 1.2 to 1.5mm. When diamond flakes of 500\u00b5m (1.7mm) minimum are used, then it will be necessary to use a bigger nozzle.
\nDiamond paint coverage rate: 4sqm\/kit. The kit consists of 1 liter of pure paint + 1 liter of thinner.<\/p>\n![\"\"](\"https:\/\/www.stardustcolors.co.uk\/blog\/wp-content\/uploads\/2016\/11\/car-paint-boat3-300x300.jpg\")
How to paint a strip of red glitter paint ?<\/strong><\/h3>\n
\nadhesive stripes, or other masking adhesives to paint the red stripes.<\/p>\n
\n– A ready-to-use paint, the Bright Red Diamond, which requires an already existing white background.
\nor
\n– Red Metal flakes, to produce a very strong glitter effect.
\nTo apply these flakes, mix them into our “Transparent matte base binder”
\nYou will need 50g of glitter\/sqm<\/p>\n
\nThen apply the clear coat. A beautiful glossy and thick topcoat is used, like our 83 Ultra High Solid clear coat or our anti-scratch HS clear coat.<\/p>\n
\nIf such time frame has been exceeded, you will need to recreate adherence with a grey abrasive sponge on the whole.<\/p>\n