Fluorescent paint for bodywork

| 4

StardustColors is a company based in Saint Laurent des Arbres (30126) and produces a range of 13 fluorescent colours,
including for example RAL colours such as GREEN 6038, red 3024 or 3026.

Fluorescent paint for car and bike

The paints do not go unnoticed!

These paints are intended for auto-moto bodywork. They are solvent-based (mono component base to topcoat).
Their fluid texture allows easy application. They are applied only over a white base, as they are slightly transparent and have a low opacifying power.

During the application (use only a spray gun), colour appears as the layers are applied: the colour is very intense and flashy, like no other paint!
A clear coat for bodywork or the StardustColors anti-UV topcoat can then be applied.

Durability of colours:

FLUORESCENT COLORCHART 2014
UV rays burn fluorescent surfaces: if exposed for too long to the sun, fluorescent colours turn white.
It is inevitable, whatever the topcoat used.
Of course, the paint will not fade while you are driving your fluorescent-painted bike!

What is the best way to protect the colours and extend their lifetime?
– Park your vehicle protected from direct sunlight. Avoid unnecessary parked car in the sun: this is the first thing to do.
– Apply a large thickness of anti-UV clear coat
– And above all, apply a maximum thickness of fluorescent paint coats: the more layers, the brighter the colour and for longer.

fluorescents paints

4 Responses

  1. Vegetti simone

    Hello!
    My name is Simone , from Italy.
    I’d like to know the euro/kg price for “rouge ral 3026-ref dt13 ” can it be used to paint suzuki gsxr 1000 k7 alloy wheels?
    Thank you..

    • stardustcolors

      Hi You can find the price per Liter of the fluorescent paint on our website stardustcolors.it
      A paint can be used for any purpose.
      Of course it is suitable for a motorcycle, as it is an automotive paint
      You of course need to spray a white basecoat or primer first

  2. Bruce De Taeye

    If the part is fully painted,clearcoat applied,would it help to sand the part again,clearcoat it one More time?
    Would this protect the fluorescent color More?Or would it not mather that much?

    Thanks

    • stardustcolors

      Hi

      It is always good for the gloss
      and also of course for the UV protection

Leave a Reply

Your email address will not be published. Required fields are marked *