2K SPRAY FILLER - LIGHT GREY

The 2K spray filler is perfect for filling irregularities and fine scratches due to sanding.
It has many qualities such as fast drying and good holding and can be easily sanded.

It’s used for finishing parts prior to their painting.

Support:
steel sheets, non-ferrous metals, carbon fiber, polyester putty, old paints

Packaging: 250ml Aerosol
Yield: 0.25m²/aerosol for a 200µm coat
VOC value: <840g/l of aerosol, propellant included.

Prior treatment:
Sand the substrates and degrease them carefully.
Work only with dust-free and clean surfaces.

Preparation:
Shake the can before to perform a test.
Coat application:
Apply 100 to 450µm coats, in 2-5 passes,
with a 5 minutes desolvation between each coat.

Dust-dry: 15 min
Sanding is possible after 2 to 4 hrs, depending on the thickness of the coat

Delay before painting the substrate:
about 2 hours at a room temperature of 20 °C.